AER AcoustiCube 3
발매되고도 국내의 여러 가지 사정으로 인하여 정식 수입되지 못하던 AER의 어쿠스틱 큐브3가
정식으로 수입 되었습니다.
AER AcoustiCube 3 의 놀라운 어쿠스틱 사운드를 만나보세요.
어쿠스틱 큐브3는 AER의 출발점이라 할 수 있는 모델입니다.… 의심의 여지 없이, 어쿠스틱 악기를
위한 기본 시스템이며, 이처럼 작은 박스 안에 최고의 어쿠스틱 사운드를 만들어 줍니다.
최선을 다해왔습니다.
- Custom made neodym - speaker system
- Bassreflex speaker chamber
- Increased supply voltage for the complete preamp section
- Independently stabilised supply voltage for all input stages
- Matrix-Inputs
- Improved dynamic control
- USB interface
- Custom routing and setup of 32 bit effect processor via pc
- Carrying bag
Twin-channel 2-way acoustic system - reference class
two Matrix Jack-inputs separate inputs for channel 1 and 2
equipped with:
AER-piezo-input stage for passive pickup
Balanced, high-end line input stag
Balanced high-end mic input stage
XLR socket at the rear for channel 2 balanced mic operation
48 V phantom power
9/18 V phantom power
E/P: combined electret mic/piezo mode
high/low attenuation, gain control, colour-switch:
'mid-cut-treble-boost', three band tone controls
Effect: 32bit AER digital effect processor, stereo, 100 presets, effect-pan, 2 presets storable on footswitch, parameter access via AER software and USB
Power amp: discrete120 W/8 ohm RMS, 20Hz-30kHz, dynamic control
Speakersystem: 8"- kevlar/neodyn custom made sub with neodyn dome tweeter, 2 way-crossover, passive 3.5kHz 18dB/Octave
Features: tuner-, record-, line-out, bal. L/R premaster-out, stereophonic headphones amplifier, DI-out, adjustable, pre/post effect, stereo effect loop (serial/parallel), link, insert, mute, notch-filter, presence, master volume to connect volume pedals to footswitch
Accessories: carrying bag, AER-Footpedal
Weight: 13.00 kg (28,66 lbs)
Dimensions: 330 x 330 x 265 mm (13.00" x 13.00"x 10.24") (WxHxD)
